AWEA LOGO

specifications
CNC Bridge Type Vertical Machining Center VP-2012 series model shown Printer

HTP Series Super Rigid Bridge Type Machining Center :

Print this page HTP-4025 HTP-5025 HTP-6025
SPECIFICATIONS
X-axis travel 4,000 mm 5,000 mm 6,000 mm
Y-axis travel 2,500 mm ( Opt. 3,200 )
Z-axis travel 1,000 mm ( Opt. 1,200 / 1,400 )
Dist. between columns 2,700 mm
Dist. from spindle nose to table top 200 ~ 1,200 mm ( Opt. 200 ~ 1,400 / 200 ~ 1,600 )
TABLE
Table size ( X x Y ) 4,020 x 2,400 mm 5,020 x 2,400 mm 6,020 x 2,400 mm
Table load capacity 15,000 kg 18,000 kg 20,000 kg
SPINDLE
Spindle taper BBT50 ( ISO 50 )
Spindle motor ( Cont. / 30 min. ) 22 / 26 kW ( Opt. 30 / 37 )
Spindle speed Gear Spindle 4,000 rpm
FEED RATE
X-axis rapids feed rate 15 m/min. 10 m/min.
Y / Z axes rapids feed rate 12 m/min.
Cutting feed rate 1 ~ 10 m/min. 1 ~ 5 m/min.
TOOL MAGAZINE
Tool magazine capacity 32 T ( Opt. 40 / 60 / 90 / 120 )
Max. tool length 350 mm ( Opt. 400 )
Max. tool weight 20 kg
Max. tool diameter / adj. pocket empty Ø 127 / Ø 215 mm
ACCURACY
Positioning accuracy ( JIS B 6338 ) ± 0.015 mm / Full Travel
Positioning accuracy ( VDI 3441 ) P ≤ 0.030 mm / Full Travel P ≤ 0.040 mm / Full Travel P ≤ 0.050 mm / Full Travel
Repeatability ( JIS B 6338 ) ± 0.003 mm
Repeatability ( VDI 3441 ) Ps ≤ 0.025 mm Ps ≤ 0.030 mm Ps ≤ 0.035 mm
GENERAL
Coolant tank capacity 1,000 liter
Lubrication oil tank capacity 6 liter
Hydraulic tank capacity 100 liter
Pneumatic pressure requirement 5 ~ 8 kg / cm²
Power requirment AC 220 ± 10 % Vac
Machine weight 41,000 kg 45,000 kg 49,000 kg

Specifications are subject to change without notice.

看图解码彩图13